In addition, protection is provided during power up/powerĭown. Ventilation and incorrect speaker configurations. Monitors for unsafe operating conditions such as shortĬircuits, miswired speaker cables, blown speakers, improper
#Gk backline 600 manual series
The Backline Series protection circuitry constantly
#Gk backline 600 manual manual
here's what the manual says about protection mode:
I just tried it by using the headphone jack.the input jack is still messed up, but less so now because the vibrations from the speaker cabinet aren't screwing it up nearly as much.so you can play without it cutting out, but if you move the wrong way and hit the cord at the input, it crackles and goes out.Īs for the gallien krueger, if i play very lightly, it won't go into protection mode.but the second i strike it harder it goes into it. i'm pretty sure it's the input jack on the BFX 50 amp itself. i figured it was the amp on the crate because it all has to do with the input jack: if i wrapped it around the amp in a certain way, it would stay on.once it became loose, then it would cut out. *oh and yes i did try switching the black/red cables between the two posts* I also tried grounding the jack to the head itself (since it's metal) with alligator clips and nothing. So any ideas? i hope i didn't blow my amp up or anything, but i'm going to stop fidgeting around until someone replies, so that i definitely DON'T blow my amp haha "speaker loads, 4 ohm minimum load total, 300w) and there's two jacks. Now, the problem is, it turns on.if i play a note, i hear it for a split second, then the head goes into "protect" mode (the power light turns from green to red, and won't send output anymore until it goes back to green).so i'm wondering, do the ohms and whatnot not match up possibly? i have no idea what the speaker can handle, as the combo amp was only a 50 watter, and my backline head is a 300 watter. then, i would connect the head to this as a little cabinet. Went to radio shack and bought a 1/4 inch panel mount phone jack, which i had then planned to hook the red/black wires from the speaker to.
So here's what I did (and my problem, it's probably because I did this wrong) The input just doesn't work, it'll crackle and cut in and out, and it's all on a printed circuit board so I have no idea what I'm doing with that, and frankly I have no want/need to fix it.So I thought, what if I took the Amp part out, took the speaker and used that as a little cab for upstairs playing? It's a 12 incher so it's not bad. So here comes my idea: my Crate BFX50 combo amp crapped out a while back. So, being lazy as I am, I always keep my head/all pedals and cables upstairs in my room now and I always wanted a small cab for upstairs playing so I don't have to blast it. At home, I've got my 4x15 Sunn cab that's such a bitch to carry around that I just leave it downstairs.
My 350 watt Black Widow can handle it.His 400 watt cab couldn't.Hey guys, so recently I've been playing in my band a lot, so every night I play I bring my Gallien Krueger Backline 600 head along with all my stuff (not the cab) to my friends house.there I play through his 4x10 fender cab. if you get this head you have to have the right cab for it.
#Gk backline 600 manual windows
It sounds good with his Behringer 300 watt head.But when I plugged my GK BL 600 into it, it was crap.It was the worse bass sound I ever had.I was so dissappointed I was going to take the head back.After practice I ran by the drummers house and got my cab and the next morning plugged the head into it.It sounded great! I can get the clean pure bass sound, or get that GK growl.I also ran it through my Digitech BP 200.man, it rocks.My wife said the windows were going to shatter. Went to band practice Friday night.My 15" Peavey Black Widow cab was at the drummers house.So I plugged the new head into a bass cab the guitar player had.(we had practice at the guitar player house).He has drums and PA at his house as well as we have all that at the drummers house too.Īnyway, his cab is a peavey 15" 400 watt cab.It isnt a Black Widow. I bought a backline 600 bass amp Friday(300 watts)
0 kommentar(er)
